TimeXtender Orchestration and Data Quality Q&A

Er det muligt fra en version 20.10.xx at foretage migration til fabric uden at skulle gendanne alle objekter ?

Hi,We have been using Orchestration to schedule our TDI execution packages and Ingest tasks, and have tasks running every other hour. We now have a new requirement to be able to pause our schedule for service windows of a couple of hours every 2nd month. Does anyone know how to pause the schedule using Orchestration or some other tool?Any help is greatly appriciated. Best,Leo

Hi we have a number of Orchestration Process Maps that have been published.Our client is wanting to start giving access to specific end users to check the status of and re - process certain maps.The client wants to only show the relevant process maps to these users. I cannot see a way to restrict the users access to view the maps, just which ones they can process.How can I enable this functionality for the client?

Hello Community! Me and our developing team are getting pretty annoyedat the fact that it does not seem to be possible to duplicate process maps. Hence, when we want to create a process map similar to another one we will have to start copy-and-pasting elements from a process map into another, then start doing all the necessary adjustments, etc - which takes time.It would be much efficient to simply duplicate a process map and take it from there.Do any of you know how make this button clickable?What does enable it?Let me know if you have any advice or quick tricks!  TX O&DQ ‘duplication button’ I am referring to 

We have configured the orchestrion with Timextender Integration .all ingest task are running successfully.the prepared tasks are failing with the following error message. TimeXtender Data Integration failed to run taskLogfile output: 1:55:43 PM Selected timezone: W. Europe Standard Time (02:00:00)1:55:43 PM UTC now: 8/27/2025 11:55:43 AM1:55:43 PM TimeXtender Version 25.1.0.72 built 8/11/2025 9:50:00 AM. Running on vm-orc-prod-0061:55:43 PM PID: 40956  - Started with arguments: --startpkg 1261 --1:55:43 PM Connected at 8/27/2025 1:55:43 PM1:55:43 PM Flushing jobs in job queue that are not running on system1:55:43 PM 1:55:43 PM ** Executing package ExePkg_JC_Manual1:55:43 PM 1:55:43 PM Package finished in under a minute on last successful run1:55:43 PM 1:55:43 PM Adding task to job queue with PID 40956, UAT PROD, TaskId 1261 and TaskType EBI_PACKAGE1:55:43 PM Starting to

Hi, I have two questions regarding Orchestration, schedule groups.(1) There is the option to make a schedule based on a SQL custom script. When I try to test this functionality out with the following statement:SELECT CAST('2025-06-10 01:00:00' AS DATETIME)It gives me the following pop-up:  Does someone know why I don't get query result = '10-06-2025 01:00:00’? The SQL statement produces a valid datetime value in SMSS.(2) I need to schedule a job that runs four times per day for a project. I wanted to build this schedule with the custom SQL option and by using a calendar table in our database from the Prepare Instance. Is this possible? Thanks in advance!

Hello.We are working on adding PBI datasets to the Orchestration process. I have followed these instructions and up until no. 3 in the Power BI part, everything has been a success. However, I’m supposed to choose Orchestration > Packages, select New > Power Bi Refresh. But Power BI Refresh is not an option:  Is there a particular reason for this? I have added Power BI Refresh to the workspace (as a member currently, does it have to be an admin? That is not specified in the instructions at least.)I’m on TimeXtender Data Governance version 24.3.0.87Best regards.   

In TimeXtender Orchestration, you have the option to set ‘Retry on Failure’ equal to True on a package (e.g. a TimeXtender Ingest package). What does this setting do? It will probably retry the package in a process if it fails? But can you set how many retries should be carried out if it keeps on failing? Also, the ‘Retry in (seconds)’ setting is probably the amount of time Orchestration waits before it starts the retry? I have searched the Community but I cannot find any proper documentation about this, or am I missing out on some article?  

How can I stop a process from running in the TimeXtender DG Desktop application?I see an article about a process queue but nor in the portal nor in the desktop application I can see this menu. Maybe that is a functionality in the old version?

Hi,Are there some specific ports or something that needs to be open for Exmon to work? When I’m at home Exmon DG Desktop works just fine, but when I’m at work I get an error as you can see in the attached picture. What SQL server is the application trying to reach? We don’t have any local databases configured for Exmon since we only use it for job scheduling in our SAAS environment.BRTomas Hertzman 

The goal of Data Quality controls is to find and quickly fix data quality errors in source systems and processes. When the source system allows you to directly link into a specific record, you can direct data owners to that record for fast resolution.In this tutorial we will use Business Central as an example to link to. Understanding the URLFirst you need to understand the source system URL to be able to regenerate it.For example, Business Central URLs are of the type:https://businesscentral.dynamics.com/TENANTID/ENVIRONTMENT/?company=COMPANYAS&page=PAGENUMBER&dc=0&bookmark=BOOKMARK The page refers to the type and for example the G/L Account Card is number 15.Each record is identified via Bookmark which we can’t recreate but instead we can filter down to a single record with the “filter” parameter.So if we remove the bookmark parameter and instead add: &filter='No.' IS '10102

We have recently installed the new Exmon desktop V24.3.0.49 and have started migrating our TimeXtender SAAS packages to the new Ingest, Prepare and Deliver packages.Everything works fine in creating the packages.There is some strange behavior on the Ingest packages however!If you then open a fresh Exmon desktop instance and open an Ingest package definition it will show an abbreviated name of the task selected and the drop down will not be populated with the list of Ingest tasks, just the task selected.If you then refresh the list it will change the selected package to the corresponding package on a different ingest instance! Without any user interaction apart from pressing the refresh button.In our example it is changing dev ingest instances to production! This doe not happen for Prepare or deliver packages. Something to note and put on the hotfix list for Exmon.

Good moringI am in the TimeXtender DG Desktop version 24.3When I click on Tools → Configuration → Advanced I see a lot of timeout settings.I can not see what the unit of measurement is, are they all in minutes? Could not find this in the help.Greetings, Roy 

Is there a way in TimeXtender Orchestration (Exmon DG) to make a scheduled group (with a fixed start time, which cannot be earlier) wait for another delayed running scheduled group to finish?If the second scheduled group starts while the first one is still running, it will fail because it is not allowed to run at the same time.This can of course be solved by using the concurrent packages option in TDI, but that is not always desirable/useful.

How to Create a Data Provider Command Package to Wait for Another Job to FinishCreating a Data Provider Command Package to Wait for Another Job to FinishWhen working with data processes in TimeXtender Data Orchestrator, there are instances when you may need to wait for an unrelated job to complete before initiating another process. In such cases, you can create a Data Provider Command package that ensures the second process starts only after the first job finishes.Step-by-Step GuideCreate a Package > Data Provider Command Select the Data Governance Data Provider and Custom SQLCustom SQL CommandUse the following SQL command to create the wait mechanism:DECLARE @task_id int = 123 -- the task id of the schedule groupDECLARE @task_type varchar(20) = 'EBI_PACKAGE' -- the type of the object you are running within the schedule group, as we cannot wait fo

Dear Sir,“ It’s our pleasure to announce the release 24.3 of TimeXtender Orchestration & Data Quality and TimeXtender Data Enrichment, featuring exciting new updates and enhancements. “So we are just migrating to TX 6766.1 and now our customer is asking for more options to Orchestrate their TimeXtender environment.Question:Where can we download the latest and the greatest of TimeXtender Orchestration 24.3 ?We would like to setup Exmon DG Client Desktop in our customers new TimeXtender environment.Thanks in advance for looking into this.Regards,Arthur

I see that there is a new set of package types that can be added in the TimeXtender (Exmon) DG Desktop (v24.3.0.35)I have tried to use them but get an error that there was no prepare package found for my selected Data Provider.Can anyone provide any guide how to use this new feature, and if it is fully available yet?   

I have a scenario where Exmon periodically seems to loose synchronization, or perhaps has some status issue relating to a package, Where the TX package will just error out immediately on the process map with an error that the job is already running. I am using Exmon against the SAAS version of TimeXtender (holistic). The underlying package is definitely not erroring out or is running. But Exmon seems to think that the package/Job is running.So far the only way I have been able to correct this is by deleting the package and re-adding it. But this keeps reappearing randomly or different packages with the Exmon processes. Is there a way to clear the status of an Exmon package or is this a bug that needs addressing?Using TX 6645.1 and Exmon 24.2.0.28Help! finding it hard to explain this one away with the client!

Hi,How can I get execution stats of Exmon into PowerBI to make my own report out of it?

Hi want to switch between a client’s Exmon environment and our partner Exmon environment.I have been using the Exmon desktop on my personal laptop connecting to the Clients Exmon environment. But I cannot seem to logout of the credentials used for the client so that I can log onto our Partner Exmon environment with different credentials.Is there a way to sign off from the Exmon Desktop so that it prompts you for the user credentials to use to sign in?

Hi, Does anyone knows if it is possible to stop/ kill a running execution within Exmon DG? 

 Hi,I am not sure if I am doing something wrong or if it is a bug. But after I created a lookup column to another table; the values are all white when I want to select one of these values in Exmon DM Desktop.   Already restarted the program but still the same issue. Anyone got any idea or is this a bug which should be fixed?Regards,Devin

I want to display data from my local SQL Server in the Report section of Exmon DG’s web interface. I have installed Exmon Gateway on my local machine which I want to connect to and created a Data Provider for the database I want to access. I can access this Data Provider through the Exmon DG Desktop and data is displayed in the report as intended (marked green).  Exmon DG Desktop Exmon GatewayIn the Exmon DG’s web interface, however, I get the following error message: